Product Category: Consumables

A highly refined nonfluorescent gray magnetic powder used for dry method magnetic particle inspection. It is designed to be used in visible light to reveal minute discontinuities on fabricated components or weldments such as bridges, pipes, large tanks, machinery and equipment. It meets or exceeds AMS 3040 and all applicable industry specifications.

Ardrox® 9PR50 is a Class 2, Method C, AMS 2644 approved cleaner/remover. It is a quick drying, non-halogenated (non-chlorinated) solvent for removing oil, grease and similar soils from metal surfaces. It provides a high level of cleaning efficiency with operational safety. It is completely corrosion safe for use on both ferrous and non-ferrous alloys. Ardrox 9PR50 is an excellent penetrant remover.

Ardrox 800/3 is composed of finely divided black magnetic particles suspended in an odourless kerosene with a high flash point, designed to ensure excellent particle mobility. These black particles are chosen for their strong magnetic responsiveness, low coercivity to prevent coagulation, and extended operational lifespan.

Ardrox® 906 is a water washable colour contrast penetrant, widely used in many industries for the detection of indications which are open to the surface of non-porous parts. Ardrox 906 is a dark red in colour, allowing easy control and monitoring of the washing process.

Ardrox® 8901W is a suspension of a white pigment in a resin base, which utilises a fast drying, flammable solvent system. The product does not contain any halogenated hydrocarbons.

Ardrox® 9D1B Developer is a liquid product consisting of finely divided white powder dispersed in a nonhalogenated volatile solvent system.

Ardrox® 8506 Fluorescent Magnetic Particle Fluid consists of finely-divided fluorescent magnetic particles, dispersed in a hydrocarbon carrier fluid. It will fluoresce brilliant yellow/green under ultraviolet radiation with a predominant wavelength of 365 nanometers. ARDROX® 8506 meets the requirements of AMS 3046.

A highly refined and bonded nonfluorescent gray magnetic powder used for dry method magnetic particle inspection. It is designed to be used in visible light to reveal discontinuities on fabricated components or weldments such as bridges, drill pipes, large tanks and machinery. This specially bonded iron based powder is designed to minimize “dustiness” and provide clear, sharp discontinuities. The decrease in dusting allows for a safer inspection area. It meets or exceeds AMS 3040 and all applicable industry specifications.

A highly refined nonfluorescent blue magnetic powder used for dry method magnetic particle inspection. It is designed to be used in visible light to reveal minute discontinuities on fabricated components or weldments such as bridges, pipes, large tanks, machinery and equipment. It meets or exceeds AMS 3040 and all applicable industry specifications.

A highly refined nonfluorescent yellow magnetic powder used for dry method magnetic particle inspection. It is designed to be used in visible light to reveal minute discontinuities on fabricated components or weldments such as bridges, pipes, large tanks, machinery and equipment. It meets or exceeds AMS 3040 and all applicable industry specifications.