Flaw Detection Gauges

DFX-615

The DFX Series digital ultrasonic flaw detectors have been designed to meet a variety of application requirements, according to feature sets and performance requirements. There are 4 models to select from, according your application demands. These are packaged in an all aluminum housing for rugged working environments.

More Details

The DFX series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure, or high resolution for precision aerospace parts, the DFX series flaw detectors are equipped with the necessary features to do the job. They can go where you go, to do the work you do, saving you time and money, making your inspections fast and accurate. Features: • Transflective Color TFT Display • Broad & Narrow Band Amplifier • Square Wave Pulser (Active Edge) • Extruded Aluminium Case (IP65) • Digital Thickness Display • DAC/TCG/AWS/DGS • Automatic Calibration • PC/Video/Analog Outputs • Long Battery Life (Li-ion pack) • Large Memory Capacity • Curved Surface Correction • Alphanumeric Notes • Trig function • Help feature

PHYSICAL

Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
Case: Extruded Aluminum.
Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable)Storage -40 to +75°C or -40 to 167°F
Environmental: Meets IP65 requirements.

SPECIFICATIONS

Units: English (in), Metric (mm), or Time (µs).
Probe Zero: 0-999.999 µs.
Velocity: 0.0393 to 0.3937 in/µs (1000-9999m/s).
Test Range: 0 – 0.2in (5mm) up to 0 – 400in (10,000mm) at steel velocity. Variable in sequence, 0.4in or 0.04in (10mm or 1mm).
Test Modes: Pulse-echo and transmit/receive.
Gates: Start & Width adjustable over full range. Amplitude 0 -100%, 0.5% steps. Visual & audible alarms. Single gate positive trigger, and two gates positive and negative triggering. Gate 2 has selectable 0.6 second delay on alarm.
Depth – Depth and amplitude of signal in gate.
Echo Echo – Echo-Echo distance, automatic gate 2 position.
Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
T-Min – Holds minimum thickness in depth mode.
System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
Pulser Voltage: 200 volt peak amplitude, rise/fall time < 10ns into 50ohm.
Pulser Width:fixed at 100ns.

SPECIFICATIONS

ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
P.R.F.: Selectable 35 to 1000Hz, 5Hz steps.
Screen Update Rate: 50 or 60Hz.
Rectification: Full wave, positive or negative half wave and unrectified RF.
Delay:0 – 400 in (10,000mm)
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.
Frequency Bands: 4Broadband 1 – 10 MHz (-6dB).
Vertical Linearity: 1% full screen height.
Amplifier Linearity: +/- 0.1 dB.
Horizontal Linearity: +/- 0.4% full screen width (FSW).
Reject: 50% suppressive reject. LED warning when selected.

MEMORY

Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
Panel Memory: 100 storage locations for calibration settings.
A-Scan Memory: 800 waveforms.

FEATURES

Wave Smoothing: Produces a smooth signal envelope.
AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.

FEATURES

API: Automatic defect sizing in accordance with API 5UE.
AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
Auto-Cal: Provides Automatic calibration with two echoes.
Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
Display Freeze: Hold current waveform on screen.
Peak Memory: For echodynamic pattern determination.
Online Help: Instant operator guidance on operation accessed from direct key.
Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

Battery: Lithium Ion battery pack 14.4V,
5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

USB: For connection to PC, keyboard and printer.
Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

2 year limited

DFX-7

Sizing Toolkits: DAC, AWS, TCG, DGS.
Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).
P.R.F. – 8 to 333 Hz, adjustable.
Screen Refresh Rate: Adjustable 60 & 120.
Detection: Z-Cross, Flank & Peak.

Automatic: probe zero, probe recognition, and Temperature compensation.
Measurement: Variety of modes to address a number of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier.
Windows PC interface software.
2 year limited warranty.

Thickness Gauge:

Automatic: probe zero, probe recognition, and Temperature compensation.
Measurement: Variety of modes to address a number of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier.
Windows PC & MAC OSX interface software.
2 year limited warranty.

Flaw Detector:

Sizing Toolkits: DAC, AWS, TCG, DGS.
Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).
P.R.F. – 8 to 333 Hz, adjustable.
Screen Refresh Rate: Adjustable 60 & 120.
Detection: Z-Cross, Flank & Peak.

DFX-625

The DFX Series digital ultrasonic flaw detectors have been designed to meet a variety of application requirements, according to feature sets and performance requirements. There are 4 models to select from, according your application demands. These are packaged in an all aluminum housing for rugged working environments.

More Details

The DFX series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure, or high resolution for precision aerospace parts, the DFX series flaw detectors are equipped with the necessary features to do the job. They can go where you go, to do the work you do, saving you time and money, making your inspections fast and accurate. Features: • Transflective Color TFT Display • Broad & Narrow Band Amplifier • Square Wave Pulser (Active Edge) • Extruded Aluminium Case (IP65) • Digital Thickness Display • DAC/TCG/AWS/DGS • Automatic Calibration • PC/Video/Analog Outputs • Long Battery Life (Li-ion pack) • Large Memory Capacity • Curved Surface Correction • Alphanumeric Notes • Trig function • Help feature

PHYSICAL

Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
Case: Extruded Aluminum.
Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
Temperature:Operating -10 to +55°C or 14 to 131 -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
Environmental: Meets IP65 requirements.

SPECIFICATIONS

Units: English (in), Metric (mm), or Time (µs).
Probe Zero: 0-999.999 µs.
Velocity: 0.0393 to 0.3937 in/µs (1000-9999m/s).
Test Range: 0 – 0.2in (5mm) up to 0 – 400in (10,000mm) at steel velocity. Variable in sequence, 0.4in or 0.04in (10mm or 1mm).
Test Modes: Pulse-echo and transmit/receive.
Gates: Start & Width adjustable over full range. Amplitude 0 -100%, 0.5% steps. Visual & audible alarms. Single gate positive trigger, and two gates positive and negative triggering. Gate 2 has selectable 0.6 second delay on alarm.
Depth – Depth and amplitude of signal in gate.
Echo Echo – Echo-Echo distance, automatic gate 2 position.

MEASUREMENT MODES

Depth – Depth and amplitude of signal in gate.
Echo Echo – Echo-Echo distance, automatic gate 2 position.
Gate to Gate – Echo-Echo , manual gate 2 position.
Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.

MEASUREMENT MODES

T-Min – Holds minimum thickness in depth mode.
System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
Pulser Voltage: 200 volt peak amplitude, rise/fall time < 10ns into 50ohm.
Pulser Width:fixed at 100ns.
ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
P.R.F.: Selectable 35 to 1000Hz, 5Hz steps.
Screen Update Rate: 50 or 60Hz.
Rectification: Full wave, positive or negative half wave and unrectified RF.
Delay:0 – 400 in (10,000mm)
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.
Frequency Bands: 4Broadband 1 – 10 MHz (-6dB).
Vertical Linearity: 1% full screen height.
Amplifier Linearity: +/- 0.1 dB.
Horizontal Linearity: +/- 0.4% full screen width (FSW).
Reject: 50% suppressive reject. LED warning when selected.

MEMORY

Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
Panel Memory: 100 storage locations for calibration settings.
A-Scan Memory: 800 waveforms.

FEATURES

Wave Smoothing: Produces a smooth signal envelope.
AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.

FEATURES

AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.
API: Automatic defect sizing in accordance with API 5UE.
AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
Auto-Cal: Provides Automatic calibration with two echoes.
Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
Display Freeze: Hold current waveform on screen.
Peak Memory: For echodynamic pattern determination.
Online Help: Instant operator guidance on operation accessed from direct key.
Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

Battery: Lithium Ion battery pack 14.4V,
5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

USB: For connection to PC, keyboard and printer.
Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

2 year limited

DFX-635

The DFX-635 Digital Ultrasonic Flaw Detector has been designed to meet a variety of application requirements, according to feature sets and performance requirements. It is packaged in an all aluminum housing for rugged working environments.

More Details

The DFX series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure, or high resolution for precision aerospace parts, the DFX series flaw detectors are equipped with the necessary features to do the job. They can go where you go, to do the work you do, saving you time and money, making your inspections fast and accurate. Features: • Transflective Color TFT Display • Broad & Narrow Band Amplifier • Square Wave Pulser (Active Edge) • Extruded Aluminium Case (IP65) • Digital Thickness Display • DAC/TCG/AWS/DGS • Automatic Calibration • PC/Video/Analog Outputs • Long Battery Life (Li-ion pack) • Large Memory Capacity • Curved Surface Correction • Alphanumeric Notes • Trig function • Help feature

PHYSICAL

Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
Case: Extruded Aluminum.
Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
Environmental: Meets IP65 requirements.

SPECIFICATIONS

Units: English (in), Metric (mm), or Time (µs).
Probe Zero: 0-999.999 µs.
Velocity: 0.0100 in/µs (256 to 16000 m/s.
Test Range: 0 – 0.05in (1mm) up to 0 – 800in (20,000mm) at steel velocity. Variable in 1, 2, 5 sequence or continuously in 0.05in (1mm) increments. Also from 1 to 5000(µs).
Test Modes: Pulse-echo and transmit/receive.
Gates: Two fully independent gates with positive and negative triggering for each gate.Two fully independent gates with positive and negative triggering for each gate.
Gate Expansion: 635 & 638 Expands range to width of Gate 1.

GATE MONITOR DELAY:

Selectable 0.6 sec delay on gate 2 negative monitor.

MEASUREMENT MODES:

Signal Monitor
Depth – Depth and amplitude of signal in gate.
Echo Echo – Echo-Echo distance, automatic gate 2 position.
Gate to Gate – independent gates.
Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
T-Min – Holds minimum thickness in depth mode.

MEASUREMENT MODES

System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
Pulser Voltage: 100V – 350V (450V 638 ) square wave pulser. Pulse width from spike to 2000ns duration – rise/fall times < 5ns into 50 ohms.
Pulser Width: Adjustable in 2% of nominal width, minimum 1ns maximum 40ns.
ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
P.R.F.: Selectable 35 to 5000Hz, 5Hz steps.
Screen Update Rate: 50 or 60Hz.
Rectification: Full wave, positive or negative half wave and unrectified RF.
Delay:0 – 800in (20,000mm) at steel velocity in 0.02 steps (0.05mm).
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.Frequency Bands: 6 narrow bands centered at 0.5, 1, 2.25, 5, 10 & 15 MHz. Broad band at 2 to 22 MHz (-6dB) and 1 to 35 MHz (-20dB).Vertical Linearity: 1% full screen height.Amplifier Linearity: +/- 0.1 dB.Horizontal Linearity: +/- 0.4% full screen width (FSW).Reject: 80% linear reject.

MEMORY

Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
Panel Memory: 100 storage locations for calibration settings.
A-Scan Memory: 800 waveforms.

FEATURES

Wave Smoothing: Produces a smooth signal envelope.
AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.

FEATURES

API: Automatic defect sizing in accordance with API 5UE.
AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
TCG: Time corrected gain. 40 dB dynamic range, 30 dB per microsecond, up to 10 points for curve definition.
Auto-Cal: Provides Automatic calibration with two echoes.
Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
Display Freeze: Hold current waveform on screen.
Peak Memory: For echodynamic pattern determination.
Online Help: Instant operator guidance on operation accessed from direct key.
Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

Battery: Lithium Ion battery pack 14.4V,
5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

USB: For connection to PC, keyboard and printer.
Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

2 year limited

DFX-638

The DFX-638 Digital Ultrasonic Flaw Detector has been designed to meet a variety of application requirements, according to feature sets and performance requirements. It is packaged in an all aluminum housing for rugged working environments.

More Details

The DFX series ultrasonic flaw detectors are full featured digital scopes designed to handle the simplest to the most difficult applications. Whether the application requires high penetration for materials that are difficult to measure, or high resolution for precision aerospace parts, the DFX series flaw detectors are equipped with the necessary features to do the job. They can go where you go, to do the work you do, saving you time and money, making your inspections fast and accurate. Features: • Transflective Color TFT Display • Broad & Narrow Band Amplifier • Square Wave Pulser (Active Edge) • Extruded Aluminium Case (IP65) • Digital Thickness Display • DAC/TCG/AWS/DGS • Automatic Calibration • PC/Video/Analog Outputs • Long Battery Life (Li-ion pack) • Large Memory Capacity • Curved Surface Correction • Alphanumeric Notes • Trig function • Help feature

PHYSICAL

Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
Case: Extruded Aluminum.
Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
Environmental: Meets IP65 requirements.

SPECIFICATIONS

Units: English (in), Metric (mm), or Time (µs).
Probe Zero: 0-999.999 µs.
Velocity: 0.0100 in/µs (256 to 16000 m/s.
Test Range: 0 – 0.05in (1mm) up to 0 – 800in (20,000mm) at steel velocity. Variable in 1, 2, 5 sequence or continuously in 0.05in (1mm) increments. Also from 1 to 5000(µs).
Test Modes: Pulse-echo and transmit/receive.
Gates: Two fully independent gates with positive and negative triggering for each gate.Two fully independent gates with positive and negative triggering for each gate.
Gate Expansion: 635 & 638 Expands range to width of Gate 1.

GATE MONITOR DELAY:

Selectable 0.6 sec delay on gate 2 negative monitor.

MEASUREMENT MODES:

Signal Monitor
Depth – Depth and amplitude of signal in gate.
Echo Echo – Echo-Echo distance, automatic gate 2 position.
Gate to Gate – independent gates.
Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
T-Min – Holds minimum thickness in depth mode.

MEASUREMENT MODES

System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
Pulser Voltage: 100V – 350V (450V 638 ) square wave pulser. Pulse width from spike to 2000ns duration – rise/fall times < 5ns into 50 ohms.
Pulser Width: Adjustable in 2% of nominal width, minimum 1ns maximum 40ns.
ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
P.R.F.: Selectable 35 to 5000Hz, 5Hz steps.
Screen Update Rate: 50 or 60Hz.
Rectification: Full wave, positive or negative half wave and unrectified RF.
Delay:0 – 800in (20,000mm) at steel velocity in 0.02 steps (0.05mm).
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.Frequency Bands: 6 narrow bands centered at 0.5, 1, 2.25, 5, 10 & 15 MHz. Broad band at 2 to 22 MHz (-6dB) and 1 to 35 MHz (-20dB).Vertical Linearity: 1% full screen height.Amplifier Linearity: +/- 0.1 dB.Horizontal Linearity: +/- 0.4% full screen width (FSW).Reject: 80% linear reject.

MEMORY

Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
Panel Memory: 100 storage locations for calibration settings.
A-Scan Memory: 800 waveforms.

FEATURES

Wave Smoothing: Produces a smooth signal envelope.
AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.
API: Automatic defect sizing in accordance with API 5UE.

FEATURES

AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
TCG: Time corrected gain. 40 dB dynamic range, 30 dB per microsecond, up to 10 points for curve definition.
Auto-Cal: Provides Automatic calibration with two echoes.
Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
Display Freeze: Hold current waveform on screen.
Peak Memory: For echodynamic pattern determination.
Online Help: Instant operator guidance on operation accessed from direct key.
Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

Battery: Lithium Ion battery pack 14.4V,
5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

USB: For connection to PC, keyboard and printer.
Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

ADDITIONAL FEATURES:

Interface trigger: Interface gate locks to surface echo and eliminates water path variation.High Power Pulser: 450 volt boost.

WARRANTY

2 year limited

DFX-7+

Sizing Toolkits: DAC, AWS, TCG, DGS.
Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).
P.R.F. – 8 to 333 Hz, adjustable.
Screen Refresh Rate: Adjustable 60 & 120.
Detection: Z-Cross, Flank & Peak.

Automatic: probe zero, probe recognition, and Temperature compensation.
Measurement: Variety of modes to address a number of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier.
Windows PC interface software.
2 year limited warranty.

Thickness Gauge

Automatic: probe zero, probe recognition, and Temperature compensation.
Measurement: Variety of modes to address a number of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier.
Windows PC & MAC OSX interface software.
2 year limited warranty.

Flaw Detector

Sizing Toolkits: DAC, AWS, TCG, DGS.
Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).
P.R.F. – 8 to 333 Hz, adjustable.
Screen Refresh Rate: Adjustable 60 & 120.
Detection: Z-Cross, Flank & Peak.

DFX-8

Thickness Gauge Features

Auto: probe zero, probe recognition, and temperature compensation.
Transducer Types: Dual element, Single Contact & Delay line.
Measurement Modes: Includes pulse-echo (P-E), echo-echo (E-E), echo-echo verify (E-EV), pulse-echo coating (PECT), pulse-echo temperature compensation (PETP) & coating only (CT) modes to address a variety of applications.
Three independent gates.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifiers.
Store up to 64 custom setups.

Flaw Detector Features

Pulser Voltage: 100 – 200 volt square wave.
Gain: 0 – 110 dB range.
Filters: Wide, 1, 2, 5 & 10 MHz
Sizing Toolkits: DAC, AWS, TCG, DGS.
Blanview sunlight viewable QVGA display (320×240 pixels).
P.R.F. – 8Hz to 2kHz, adjustable.
Screen Refresh Rate: 60 Hz.
Detection Modes: Z-Cross, Flank & Peak.

DFX-8+

Thickness Gauge Features

Auto: probe zero, probe recognition, and temperature compensation.
Transducer Types: Dual element, Single Contact & Delay line.
Measurement Modes: Includes pulse-echo (P-E), echo-echo (E-E), echo-echo verify (E-EV), pulse-echo coating (PECT), pulse-echo temperature compensation (PETP) & coating only (CT) modes to address a variety of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifiers.
Store up to 64 custom setups.
3 independent gates.
Additional coating gauge feature.

Flaw Detector Features

Pulser: 100 – 400 volt tone burst.
Gain: 0 – 110 dB range.
Filters: Wide, .5, 1, 2, 5, 10 & 15 MHz.
Sizing Toolkits: DAC, AWS, TCG, DGS.
Blanview sunlight viewable QVGA display (320×240 pixels).
P.R.F. – 8Hz to 2kHz, adjustable.
Screen Refresh Rate: 60 Hz.
Detection Modes: Z-Cross, Flank & Peak.
Auto Interface Gate: Immersion testing.
Analog output: 1-10 volts.
Serial Output: For use with remote commander, and B-Scan crawler.
Wave Averaging: Improved resolution and wave display.

Leave a Reply Cancel reply