Products Page

Diamond Extender Fluid

$0.00Price:
Loading Updating cart...

Diamond Compounds

$0.00Price:
Loading Updating cart...

Diamond Suspensions

Available in both Mono and Poly Crystalline

$0.00Price:
Loading Updating cart...

Abrasive Rolls and Strips

$0.00Price:
Loading Updating cart...

Abrasive Belts

Additional DescriptionMore Details

Grinding Belts

Grit
60
120
180
240
320
400
600
800

Grinding Belts

Grit
60
120
180
240

$0.00Price:
Loading Updating cart...

Diamond Bonded Diamond Discs

PSA backed Diamond bonded discs.
Available in a variety of Micron sizes.

$0.00Price:
Loading Updating cart...

Abrasive Grinding

Abrasive Grinding Plain Backed

Grit Qty
60 100
120 100
180 100
240 100
320 100
400 100
600 100
800 100
1200 100

Abrasive Grinding PSA Backed

Grit Qty
60 100
120 100
180 100
240 100
320 100
400 100
600 100
800 100
1200 100

Wet/DRY SILICON CARBIDE C WEIGHT ABRASIVE GRINDING DISCS are manufactured in North America and are classified to US standards. FEPA is grit classification according to abrasives manufactured in Europe and are classified to European standards.

$0.00Price:
Loading Updating cart...

CBN WAFERING BLADES

MEDIUM CONCENTRATION METAL BOND/RESIN BOND CONTINUOS RIM are recommended or sectioning of ferrous materials including high speed steels, inconel, stellite, iron and cobait base alloy, nickel base super alloys, led base alloys, titanium alloys and stainless steels.

HIGH CONCENTRATION – METAL BOND

continuous rim diamond wafering blades are recommended for agressive general laboratory sectioning of ductile materials, most metals,polymers, pc boards, thermal spray coatings and  titanium.(Used on higher loads & speeds)

LOW CONCENTRATION – METAL BOND

continuous rim diamond wafering blades are recommended for sectioning very hard or brittle materials including ceramics, carbides, re-fractories, silicon, boron composites, glass and rock. (allows for higher loads being applied at sample interface). (Used on lower loads & speeds)

RESIN BOND DIAMOND WHEELS

continuous rim diamond blades are recommended for cutting of ferrous metals.

RESIN BONDED ABRASIVE CUT-OFF WHEELS

Uses aluminum oside or silicn carbide particles in a bakelite binder. These wheels are especially formulated  to give the ideal cut surface finish for metallographic preparations. The 10″, 12″ and 17″ wheels are designated as our special ‘METCUT’ series.

$0.00Price:
Loading Updating cart...

King Brinell

With the advent of new requirements for quality control, accurate and reliable hardness testers are needed today more than ever. The King Brinell is designed to make impressions that are used to measure the hardness of a metal. A universally recognized tester, the King portable Brinell has a number of advantages.

  • Permanence – Impression can be checked and rechecked at any time.
  • Accuracy – Calibrated accurate to 1/2 of 1% of load. Can be used for higher loads up to 3,000 kg. Breaks through surface heat treatment to get to the core of the material.
  • Durability – Some King Portable Brinell testers have been working for over 60 years.
  • Versatility – Can be used in virtually any position: right side up, upside down or sideways. Take the tester to the metal, not the metal to the tester

On the market for over 60 years, King Brinell hardness testers are lightweight, easy to maneuver and require only one operator, making them ideal for use as portable or bench units. Versatile enough to test virtually any size and shape of metal specimen, King testers are easy to use. The operator simply places the specimen between the anvil and the test head, cranks the test head down onto the specimen, locking the tester in place, closes the pressure release valve, and pulls the hydraulic lever until the desired load is reached. The tester applies up to a 3,000 kg load on a 10mm ball, making a lasting impression, which is available for re-reading at any time. A by-pass valve is automatically activated at the calibrated load, eliminating the chance of overloading. The impression is then read and recorded by the operator using a Brinell microscope such as the King deep reading microscope or a Kingscan automatic Brinell microscope. The King Portable Brinell meets all international standards for Brinell testing including ASTM E-110, British Standard #240, Pt. 2, Sect. 1 and JIS Standards, and is calibrated to 1/2 of 1% of load on equipment traceable to NIST Standards.

$0.00Price:
Loading Updating cart...

METPOL

METPOL series of grinding/polishing machines offer an economical solutions to your metallograhic sample preparation needs with variables speeds from 50-600 rpm, along with a fether touch digital control panel and detouchable water coolant sprayer. All contained with a FRP body construction.

$0.00Price:
Loading Updating cart...
Close
E-mail It