Product Category: Dakota

• Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
• Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
• Case: Extruded Aluminum.
• Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
• Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable)Storage -40 to +75°C or -40 to 167°F
• Environmental: Meets IP65 requirements.

SPECIFICATIONS

• Units: English (in), Metric (mm), or Time (µs).
• Probe Zero: 0-999.999 µs.
• Velocity: 0.0393 to 0.3937 in/µs (1000-9999m/s).
• Test Range:  0 – 0.2in (5mm) up to 0 – 400in (10,000mm) at steel velocity. Variable in sequence, 0.4in or 0.04in (10mm or 1mm).
• Test Modes: Pulse-echo and transmit/receive.
• Gates: Start & Width adjustable over full range. Amplitude 0 -100%, 0.5% steps. Visual & audible alarms. Single gate positive trigger, and two gates positive and negative triggering. Gate 2 has selectable 0.6 second delay on alarm.
• Depth – Depth and amplitude of signal in gate.
• Echo Echo – Echo-Echo distance, automatic gate 2 position.
• Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
• T-Min – Holds minimum thickness in depth mode.
• System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
• Pulser Voltage: 200 volt peak amplitude, rise/fall time < 10ns into 50ohm.
• Pulser Width:fixed at 100ns.

• ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
• P.R.F.: Selectable 35 to 1000Hz, 5Hz steps.
• Screen Update Rate: 50 or 60Hz.
• Rectification: Full wave, positive or negative half wave and unrectified RF.
• Delay:0 – 400 in (10,000mm)
• Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.
• Frequency Bands: 4Broadband 1 – 10 MHz (-6dB).
• Vertical Linearity: 1% full screen height.
• Amplifier Linearity: +/- 0.1 dB.
• Horizontal Linearity: +/- 0.4% full screen width (FSW).
• Reject: 50% suppressive reject. LED warning when selected.

MEMORY

• Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
• Panel Memory: 100 storage locations for calibration settings.
• A-Scan Memory: 800 waveforms.

FEATURES

• Wave Smoothing: Produces a smooth signal envelope.
• AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
• DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
• AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.

• API: Automatic defect sizing in accordance with API 5UE.
• AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
• Auto-Cal: Provides Automatic calibration with two echoes.
• Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
• Display Freeze: Hold current waveform on screen.
• Peak Memory: For echodynamic pattern determination.
• Online Help: Instant operator guidance on operation accessed from direct key.
• Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

• Battery: Lithium Ion battery pack 14.4V,
• 5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

• USB: For connection to PC, keyboard and printer.
• Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
• Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

• 2 year limited

• Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
• Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
• Case: Extruded Aluminum.
• Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
• Temperature:Operating -10 to +55°C or 14 to 131 -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
• Environmental: Meets IP65 requirements.

SPECIFICATIONS

• Units: English (in), Metric (mm), or Time (µs).
• Probe Zero: 0-999.999 µs.
• Velocity: 0.0393 to 0.3937 in/µs (1000-9999m/s).
• Test Range: 0 – 0.2in (5mm) up to 0 – 400in (10,000mm) at steel velocity. Variable in sequence, 0.4in or 0.04in (10mm or 1mm).
• Test Modes: Pulse-echo and transmit/receive.
• Gates: Start & Width adjustable over full range. Amplitude 0 -100%, 0.5% steps. Visual & audible alarms. Single gate positive trigger, and two gates positive and negative triggering. Gate 2 has selectable 0.6 second delay on alarm.
• Depth – Depth and amplitude of signal in gate.
• Echo Echo – Echo-Echo distance, automatic gate 2 position.

MEASUREMENT MODES

• Depth – Depth and amplitude of signal in gate.
• Echo Echo – Echo-Echo distance, automatic gate 2 position.
• Gate to Gate – Echo-Echo , manual gate 2 position.
• Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.

• T-Min – Holds minimum thickness in depth mode.
• System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
• Pulser Voltage: 200 volt peak amplitude, rise/fall time < 10ns into 50ohm.
• Pulser Width:fixed at 100ns.
• ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
• P.R.F.: Selectable 35 to 1000Hz, 5Hz steps.
• Screen Update Rate: 50 or 60Hz.
• Rectification: Full wave, positive or negative half wave and unrectified RF.
• Delay:0 – 400 in (10,000mm)
• Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.
• Frequency Bands: 4Broadband 1 – 10 MHz (-6dB).
• Vertical Linearity: 1% full screen height.
• Amplifier Linearity: +/- 0.1 dB.
• Horizontal Linearity: +/- 0.4% full screen width (FSW).
• Reject: 50% suppressive reject. LED warning when selected.

MEMORY

• Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
• Panel Memory: 100 storage locations for calibration settings.
• A-Scan Memory: 800 waveforms.

FEATURES

• Wave Smoothing: Produces a smooth signal envelope.
• AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
• DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.

• AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.
• API: Automatic defect sizing in accordance with API 5UE.
• AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
• Auto-Cal: Provides Automatic calibration with two echoes.
• Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
• Display Freeze: Hold current waveform on screen.
• Peak Memory: For echodynamic pattern determination.
• Online Help: Instant operator guidance on operation accessed from direct key.
• Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

• Battery: Lithium Ion battery pack 14.4V,
• 5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

• USB: For connection to PC, keyboard and printer.
• Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
• Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

• 2 year limited

• Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
• Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
• Case: Extruded Aluminum.
• Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
• Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
• Environmental: Meets IP65 requirements.

SPECIFICATIONS

• Units: English (in), Metric (mm), or Time (µs).
• Probe Zero: 0-999.999 µs.
• Velocity: 0.0100 in/µs (256 to 16000 m/s.
• Test Range: 0 – 0.05in (1mm) up to 0 – 800in (20,000mm) at steel velocity. Variable in 1, 2, 5 sequence or continuously in 0.05in (1mm) increments. Also from 1 to 5000(µs).
• Test Modes: Pulse-echo and transmit/receive.
• Gates: Two fully independent gates with positive and negative triggering for each gate.Two fully independent gates with positive and negative triggering for each gate.
• Gate Expansion: 635 & 638 Expands range to width of Gate 1.

GATE MONITOR DELAY:

• Selectable 0.6 sec delay on gate 2 negative monitor.

MEASUREMENT MODES:

• Signal Monitor
• Depth – Depth and amplitude of signal in gate.
• Echo Echo – Echo-Echo distance, automatic gate 2 position.
• Gate to Gate – independent gates.
• Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
• T-Min – Holds minimum thickness in depth mode.

• System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
• Pulser Voltage: 100V – 350V (450V 638 ) square wave pulser. Pulse width from spike to 2000ns duration – rise/fall times < 5ns into 50 ohms.
• Pulser Width: Adjustable in 2% of nominal width, minimum 1ns maximum 40ns.
• ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
• P.R.F.: Selectable 35 to 5000Hz, 5Hz steps.
• Screen Update Rate: 50 or 60Hz.
• Rectification: Full wave, positive or negative half wave and unrectified RF.
• Delay:0 – 800in (20,000mm) at steel velocity in 0.02 steps (0.05mm).
• Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.Frequency Bands: 6 narrow bands centered at 0.5, 1, 2.25, 5, 10 & 15 MHz. Broad band at 2 to 22 MHz (-6dB) and 1 to 35 MHz (-20dB).Vertical Linearity: 1% full screen height.Amplifier Linearity: +/- 0.1 dB.Horizontal Linearity: +/- 0.4% full screen width (FSW).Reject: 80% linear reject.

MEMORY

• Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
• Panel Memory: 100 storage locations for calibration settings.
• A-Scan Memory: 800 waveforms.

FEATURES

• Wave Smoothing: Produces a smooth signal envelope.
• AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
• DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
• AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.

• API: Automatic defect sizing in accordance with API 5UE.
• AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
• TCG: Time corrected gain. 40 dB dynamic range, 30 dB per microsecond, up to 10 points for curve definition.
• Auto-Cal: Provides Automatic calibration with two echoes.
• Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
• Display Freeze: Hold current waveform on screen.
• Peak Memory: For echodynamic pattern determination.
• Online Help: Instant operator guidance on operation accessed from direct key.
• Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

• Battery: Lithium Ion battery pack 14.4V,
• 5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

• USB: For connection to PC, keyboard and printer.
• Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
• Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

WARRANTY

• 2 year limited

• Size:9.25 x 7.13 x 4.0 in (235 x 181 x 102mm)
• Weight:7.5lbs. (3,4Kgs) with Li-Ion cells.
• Case: Extruded Aluminum.
• Display: Transflective TFT Color. Display area: 4.39″ x 3.29″ (111.4 x 83.5mm) 320 x 240 pixels. A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
• Temperature:Operating -10 to +55°C or 14 to 131°F -20 to +70°C or -4 to 158°F(survivable) Storage -40 to +75°C or -40 to 167°F
• Environmental: Meets IP65 requirements.

SPECIFICATIONS

• Units: English (in), Metric (mm), or Time (µs).
• Probe Zero: 0-999.999 µs.
• Velocity: 0.0100 in/µs (256 to 16000 m/s.
• Test Range: 0 – 0.05in (1mm) up to 0 – 800in (20,000mm) at steel velocity. Variable in 1, 2, 5 sequence or continuously in 0.05in (1mm) increments. Also from 1 to 5000(µs).
• Test Modes: Pulse-echo and transmit/receive.
• Gates: Two fully independent gates with positive and negative triggering for each gate.Two fully independent gates with positive and negative triggering for each gate.
• Gate Expansion: 635 & 638 Expands range to width of Gate 1.

GATE MONITOR DELAY:

• Selectable 0.6 sec delay on gate 2 negative monitor.

MEASUREMENT MODES:

• Signal Monitor
• Depth – Depth and amplitude of signal in gate.
• Echo Echo – Echo-Echo distance, automatic gate 2 position.
• Gate to Gate – independent gates.
• Trig – Trigonometric display of beam path, depth and surface distance. Calculation of skip depth and curve surface compensation, X-offset for transducer.
• T-Min – Holds minimum thickness in depth mode.

• System Linearity: Vertical = 1% Full Screen Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
• Pulser Voltage: 100V – 350V (450V 638 ) square wave pulser. Pulse width from spike to 2000ns duration – rise/fall times < 5ns into 50 ohms.
• Pulser Width: Adjustable in 2% of nominal width, minimum 1ns maximum 40ns.
• ActiveEdge: Unique active pulse control for enhanced near surface resolution and signal response. Replaces traditional damping control.
• P.R.F.: Selectable 35 to 5000Hz, 5Hz steps.
• Screen Update Rate: 50 or 60Hz.
• Rectification: Full wave, positive or negative half wave and unrectified RF.
• Delay:0 – 800in (20,000mm) at steel velocity in 0.02 steps (0.05mm).
• Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and 20dB steps.Frequency Bands: 6 narrow bands centered at 0.5, 1, 2.25, 5, 10 & 15 MHz. Broad band at 2 to 22 MHz (-6dB) and 1 to 35 MHz (-20dB).Vertical Linearity: 1% full screen height.Amplifier Linearity: +/- 0.1 dB.Horizontal Linearity: +/- 0.4% full screen width (FSW).Reject: 80% linear reject.

MEMORY

• Thickness Logging: Storage for 8000 readings stored in Block/Location/Number coding or alpha-numeric pre-programmed work sheets. Transferable to Excel using optional PC software.
• Panel Memory: 100 storage locations for calibration settings.
• A-Scan Memory: 800 waveforms.

FEATURES

• Wave Smoothing: Produces a smooth signal envelope.
• AGC: Automatic Gain Control sets selected echo to a user defined level (10 – 90%).
• DAC: Up to 10 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, -12, -14 dB curves can be selected for JIS, ASME and EN1714 codes.
• AWS: Automatic defect sizing in accordance with AWS D1.1 Structural Welding Code.
• API: Automatic defect sizing in accordance with API 5UE.

• AVG/DGS: Automatic defect sizing using probe data. 10 probe data sets can be stored.
• TCG: Time corrected gain. 40 dB dynamic range, 30 dB per microsecond, up to 10 points for curve definition.
• Auto-Cal: Provides Automatic calibration with two echoes.
• Reference Waveform: Recalled waveform can be shown in a different color to live waveform for direct comparision.
• Display Freeze: Hold current waveform on screen.
• Peak Memory: For echodynamic pattern determination.
• Online Help: Instant operator guidance on operation accessed from direct key.
• Language Support: Six user selectable languages from: English, German, French, Spanish, Dutch, Italian, Russian, Polish, Czech, Finnish & Hungarian. Others available on request.

POWER SOURCE:

• Battery: Lithium Ion battery pack 14.4V,
• 5.0 Amp hrs. Minimum 11 hours use, typical 15 hours, indication of battery charge. Recharge time 4 hours.Charger: 100 – 240 VAC, 50 – 60Hz.

CONNECTIONS

• USB: For connection to PC, keyboard and printer.
• Outputs: Serial Interface, composite video (NTSC & PAL), analog output for amplitude and distance updated at PRF rate. Transmitter sync output.
• Transducer Connectors: available withBNC or LEMO 1 connectors (factory option).

ADDITIONAL FEATURES:

• Interface trigger: Interface gate locks to surface echo and eliminates water path variation.High Power Pulser: 450 volt boost.

WARRANTY

• 2 year limited

• Weight: 10 ounces
• Size: 2.5 W x 4.75 H x 1.25 D inches. 63.5 W x 120.7 H x 31.8 D mm
• Operating Temperature: -20 to 120F (-20 to 50C)
• Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

KEYPAD

• Sealed membrane that is resistant to both water and petroleum products.
• Six tactile-feedback keys.

TRANSDUCER

• Dual element (transmit and receive)
• 1 to 10 MHz frequency range.
• Locking quick disconnect Lemo connectors
• 4 foot cable
• Custom transducers available for special applications

• Two 1.5V alkaline or 1.2V NiCad AA cells.
• Typically operates for 200 hours on alkaline and 130 hours on NiCad.

DISPLAY

• Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
• Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
• Bar graph indicates stability or reading.

CERTIFICATION

• Factory calibration traceable to national standards.

WARRANTY

• 5 year limited.

• Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
• Switch to select English or metric units.
• Resolution: 0.001 inch (0.01 millimeter)
• Velocity Range: .0492 to .3937 in/m s. 1250 to 10,000 meters/sec
• Built-in: Stainless steel reference disk for probe zeroing.
• Four readings per second for single point measurements or 16 per second in SCAN mode.
• Single and Two point calibration option included.

• Weight: 10 ounces
• Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x  31.8 D mm)
• Operating Temperature: -20° to 120° F (-30° to 50° C)
• Case: Extruded aluminum body / nickel plated aluminum end caps.
• Resistant to impact and environmentally sealed.

KEYPAD:

• Sealed membrane that is resistant to both water and petroleum products.
• Nine tactile-feedback keys.

TRANSDUCER

• Dual element (transmit and receive).
• 1 to 10 MHz frequency range.
• Special high damped transducers available for use with through paint or coating measurements).
• Locking quick disconnect LEMO connectors.
• 4 foot cable.
• Optional cable lengths up to 100 feet.
• Custom transducers available for special applications.

• Two 1.5V alkaline or 1.2V NiCad AA cells
• Typically operates for 200 hours on alkaline and 130 hours on NiCad.
• Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

DISPLAY

• Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
• Backlight is selectable: on / off / auto ( illuminates only when taking a measurement ).
• Measurements displayed in inches, inches/microsecond.  millimeters, and meters/second.
• Bar graph indicates stability of reading.

DATA LOGGER

• Automatic numeric Data Logging system 1 to 1000 readings.

FEATURES

• Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.
• Alarm Mode:Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
• Data Ouput:RS232 output sends thickness readings to a printer, computer or other external storage device.

• Range:
• Pulse Echo Mode (Pit & Flaw Detection): Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
• Echo Echo Mode (Thru Paint & Coatings): Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
• Switch to select English or metric units.
• Resolution: 0.001 inches (0.01 millimeters)
• Velocity Range: .0492 to .3937 in/m s 1250 to 10,000 meters/sec
• Built in: Stainless steel reference disk for probe zeroing.
• Four readings per second for single point measurements or 16 per second in scan mode — captures the minimum thickness.
• Single and Two point calibration option included.

CERTIFICATION

• Factory calibration traceable to national standards.

WARRANTY

• 5 year limited

• Weight: 13.5 ounces (with batteries).
• Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
• Operating Temperature: -14° to 140°F (-10° to 60°C).
• Keyboard: Membrane switch with twelve tactile keys.
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
• Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
• EL backlit (on/off/auto).

ULTRASONIC SPECIFICATIONS

• Measurement Modes: Pulse-Echo (flaws, pits)
• Echo-Echo (thru-paint)
• Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
• Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
• Timing: 20 MHz with ultra low power
• 8 bit digitizer.

POWER SOURCE

• Three 1.5V alkaline or 1.2V NiCad AA cells.
• Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
• Auto power off if idle 5 min.
• Battery status icon.

• Range: Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).
• Echo-Echo Mode: Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102 millimeters).
• Range will vary +/- depending on the thickness of coating.
• Resolution: +/- .001 inches (0.01 mm)
• Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
• Single and Two point calibration option, or selection of basic material types.
• Units: English & Metric

DISPLAY

• Display Views: A-Scan Rectified +/- (flaw view) RF (full waveform view)
• B-Scan Cross sectional view.
• Display speed of 15 secs per screen.
• Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
• Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
• Repeatability Bar Graph Bar graph indicates stability of reading.

DATA LOGGER (INTERNAL)

• 12,000 pages of memory (alpha numeric storage).
• Page contents: 1 reading and 1 waveform per page.
• OBSTRUCT to indicate inaccessible locations.
• Memory: 16 megabit non-volatile ram.

• Transducer Types: Dual Element (1 to 10 MHz).
• Locking quick disconnect “00” LEMO connectors.
• Standard 4 foot cable.
• Custom transducers and cable lengths available for special applications.

FEATURES

• Setups: 64 custom user-definable setups.
• Factory setups can also be edited by the user.
• Gates: Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.
• Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
• Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
• Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
• Flaw Mode: Basic Prove-up flaw detection option using single element angle beam transducers.

CERTIFICATION

• Factory calibration: traceable to national standards.

WARRANTY

• 2 year limited

• Size: Width (2.5 in/63.5 mm) Height: (6.5 in/165 mm) Depth: (1.24 in/31.5 mm) Weight:13.5 ounces (with batteries).
• Keyboard:Membrane switch pad with twelve tactile keys.
• Operating Temperature:14 to 140F (-10C to 60C)
• Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
• Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
• Display (Two Options): 1/8 VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in (62 x 45.7 mm). EL backlit (on/off/auto). 25 Hz screen refresh rate. 1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 120 Hz screen refresh rate.

ULTRASONIC SPECIFICATIONS

• Measurement Modes: Coating Off: Pulse-Echo (P-E) Coating On: Pulse-Echo Coating (PECT) Temp Comp: Pulse-Echo Temperature Compensation (PETP) Thru-Paint: Echo-Echo (E-E) Thru-Paint Verify: Echo-Echo Verify (E-EV) Coating Only: Coating (CT)
• Pulser: Dual square wave pulsers.
• Receiver: Dual receivers – manual or AGC gain control with 100 dB range. Adjustable damping with color option.
• Timing: Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

POWER SOURCE

• Three 1.5V alkaline or 1.2V NiCad AA cells.
• Alkaline: grayscale up to 50 hours, and color up to 25 hours.
• Nicad: grayscale up to 25 hours, and color up to 12 hours (charger not included).
• Auto power off if idle 5 min.
• Adjustable Dim feature for color display only. Power saving.
• Battery status icon.

• Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
• Pulse-Echo Coating Mode (PECT) – (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 508 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
• Pulse-Echo Temp Comp Mode (PETP) – (Pit & Flaw Detection) Auto temperature compensation -measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
• Echo-Echo Mode (E-E) – (Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102 millimeters). Will vary based on coating.
• Echo-Echo Verify (E-EV) – (Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.
• Coating Only Mode (CT) – (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.
• Resolution: +/- 0.001 inches (0.01 mm)
• Velocity Range: 0.0492 to 0.5510 in/micro sec 1250 to 13995 meters/sec
• Single and Two point calibration option for material & coating, or selection of basic material types.
• Units: English & Metric

DISPLAY

• Large Digits – Standard thickness view. Digit Height: 0.700 in (17.78 mm). Color 0.565 in (14.35 mm).
• A-Scan – Rectified +/- (flaw view)
• RF (full waveform view).
• B-Scan – Time based cross section view. Adjustable display speed.
• Scan Bar Thickness – 6 readings per second. Viewable in B-Scan and Large Digit views.
• Repeatability Bar Graph – Bar graph indicates stability of reading.
• Feature Status Bar – Indicates features currently active.

• Log Formats: Grid (alpha numeric) Sequential (auto identifier)
• Cell contents: Graphics On: Grayscale 16,000 & Color 8,000 readings ,A/B-Scan image, & gauge settings for every reading. Graphics Off: 210,000 readings (coating, material, min & max)
• OBSTRUCT to indicate inaccessible locations.

TRANSDUCER

• Transducer Types: Dual Element (1 to 10 MHz). Flaw Prove Up (1 to 10 MHz).
• LEMO “00” connectors.
• Standard 4 foot cable.
• Custom transducers & cable lengths available for special applications.

ADDITIONAL FEATURES

• Auto probe zero, recognition and temperature compensation.
• 64 custom setup configurations.
• High speed scan up to 50 readings per second.
• Audible alarm with hi/lo limits.
• Built-in differential mode for QC inspections.

WARRANTY & CERTIFICATION

• 2 year limited
• Factory calibration traceable to NIST & MIL-STD-45662
• CE approved