Since 1984, United has manufactured computer-controlled closed loop Hardness testers. Our second generation Hardness tester, the Tru-Blue II is the lowest priced US manufactured closed loop tester that meets ASTM E18, ISO 6508 specifications and NIST recommendations.
The Tru-Blue II comes standard with a Direct certification of the hardware calibration with NIST traceability and a factory one-year indirect calibration for customer specified hardness testing scales. The tester can be put into operation without the need for an additional on-site calibration or manufacturers assistance!
Having no dead weights, pivot points and knife edges to move out of adjustment, the Tru-Blue II can be moved to a new location without having to be re-calibrated. When mounted on United’s optional mobile stand, the Tru-Blue II is transportable to different locations.
Tru-Blue Universal Features
-
- Same as Tru-Blue II
- Test Forces in Kg.:2, 2.5, 4, 5, 6.25, 7.8125, 10, 15.625, 20, 30, 31.25, 40, 62.5, 100, 120, 125, 150, 187.5 and 250.
- Test Dwell Settings selectable in 1 sec. increments: 5-30
- Direct reading of one Brinell range.
- Test Forces in Kg: 3, 5, 10, 30, 50, 100, and 120.
- Test Dwell Settings selectable in 1 sec. increments: 5-30
- Direct reading of one Vickers range.
MetTech offers a full line of hardness accessories
-
Rockwell, Brinell and Micro hardness test blocks: All test blocks come with a certification sheet containing all the necessary calibration information.- Rockwell diamond indenters: Scales A, C and N. All diamond indenters come with certifications.
- Heavy load Vickers and Micro hardness diamond indenters: ¼ , 7mm and 8mm shank sizes and Tukon.
- Carbide ball indenters: 1/16, 1/8, ¼ and ½ inch. 2.5, 5 and 10mm.
- Anvils and support devices: Spots, flats, “V”, Vari and Jack rests.
- Additional accessories: 2 inch roll mini serial and parallel printers, stationary and mobile stands, foot switch to activate test cycle, mini PS/2 keyboard.