Products Page

Model ES-X Ferrous Probe Flexible Leg

Weight
Voltage
HZ
Amps
Lift Capacity
7lbs
42/115/220 AC
50/60
3.0/5.75/3.0
15lbs @ 115V

Meets and exceeds the following specifications:
ASTM E709, ASTM E1444 ASME SECTION V, ARTICLE 7 MIL-STD-1949 MIL-STD-271

A kit can be purchased that includes the following:
1 – Ferrous Probe Yoke – with 25′ cord
1 – Carrying case
2 – lbs. red inspection powder
2 – lbs. gray inspection powder
1 – Powder bulb
1 – Blower bulb
1 – Magnetic field indicator

$0.00Price:
Loading Updating cart...

MX Series Probes

The following is a list of the most common probes used with the MX line of thickness gauges. These probes are all interchangeable and can also be used with the PR-8 and VX gauges.

$0.00Price:
Loading Updating cart...

CMX DL+

The CMX DL+ has all the features of the CMX DL, plus a full featured A-Scan presentation with RF and Rectified viewing options. The CMX DL+ is equipped with 3 fully adjustable gates (start, stop, width, & Threshold). Equipped with a 20dB boost/cut attenuator, which offers added flexibility for transducer types and applications. Selectable 50 volt pulser boost or cut (100 – 200 volts). Truly the Cadillac of the CMX series.

Additional DescriptionMore Details
PHYSICAL

  • Size: Width (2.5 in/63.5 mm)
    Height: (6.5 in/165 mm)
    Depth: (1.24 in/31.5 mm)
    Weight:13.5 ounces (with batteries).
  • Keyboard:Membrane switch pad with twelve tactile keys.
  • Operating Temperature:14 to 140F (-10C to 60C)
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
  • Display (Two Options): 1/8 VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in (62 x 45.7 mm). EL backlit (on/off/auto). 25 Hz screen refresh rate.
    1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 120 Hz screen refresh rate.

 

ULTRASONIC SPECIFICATIONS

  • Measurement Modes:
    Coating Off: Pulse-Echo (P-E)
    Coating On: Pulse-Echo Coating (PECT)
    Temp Comp: Pulse-Echo Temperature Compensation (PETP)
    Thru-Paint: Echo-Echo (E-E)
    Thru-Paint Verify: Echo-Echo Verify (E-EV)
    Coating Only: Coating (CT)
  • Pulser: Dual square wave pulsers.
  • Receiver: Dual receivers – manual or AGC gain control with 100 dB range. Adjustable damping with color option.
  • Timing: Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

 

POWER SOURCE

  • Three 1.5V alkaline or 1.2V NiCad AA cells.
  • Alkaline: grayscale up to 50 hours, and color up to 25 hours.
  • Nicad: grayscale up to 25 hours, and color up to 12 hours (charger not included).
  • Auto power off if idle 5 min.
  • Adjustable Dim feature for color display only. Power saving.
  • Battery status icon.
MEASURING

  • Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
  • Pulse-Echo Coating Mode (PECT) – (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 508 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
  • Pulse-Echo Temp Comp Mode (PETP) – (Pit & Flaw Detection) Auto temperature compensation -measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
  • Echo-Echo Mode (E-E) – (Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102 millimeters). Will vary based on coating.
  • Echo-Echo Verify (E-EV) – (Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.
  • Coating Only Mode (CT) – (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.
  • Resolution: +/- 0.001 inches (0.01 mm)
  • Velocity Range: 0.0492 to 0.5510 in/micro sec
    1250 to 13995 meters/sec
  • Single and Two point calibration option for material & coating, or selection of basic material types.
  • Units: English & Metric

 

DISPLAY

  • Large Digits – Standard thickness view. Digit Height: 0.700 in (17.78 mm). Color 0.565 in (14.35 mm).
  • A-Scan – Rectified +/- (flaw view)
  • RF (full waveform view).
  • B-Scan – Time based cross section view. Adjustable display speed.
  • Scan Bar Thickness – 6 readings per second. Viewable in B-Scan and Large Digit views.
  • Repeatability Bar Graph – Bar graph indicates stability of reading.
  • Feature Status Bar – Indicates features currently active.
DATA STORAGE

  • Log Formats: Grid (alpha numeric)
    Sequential (auto identifier)
  • Cell contents:
    Graphics On: Grayscale 16,000 & Color 8,000 readings ,A/B-Scan image, & gauge settings for every reading.
    Graphics Off: 210,000 readings (coating, material, min & max)
  • OBSTRUCT to indicate inaccessible locations.

 

TRANSDUCER

  • Transducer Types: Dual Element (1 to 10 MHz).
    Flaw Prove Up (1 to 10 MHz).
  • LEMO “00” connectors.
  • Standard 4 foot cable.
  • Custom transducers & cable lengths available for special applications.

 

ADDITIONAL FEATURES

  • Auto probe zero, recognition and temperature compensation.
  • 64 custom setup configurations.
  • High speed scan up to 50 readings per second.
  • Audible alarm with hi/lo limits.
  • Built-in differential mode for QC inspections.

 

WARRANTY & CERTIFICATION

  • 2 year limited
  • Factory calibration traceable to NIST & MIL-STD-45662
  • CE approved

$0.00Price:
Loading Updating cart...

CMX DL+

The CMX DL+ has all the features of the CMX DL, plus a full featured A-Scan presentation with RF and Rectified viewing options. The CMX DL+ is equipped with 3 fully adjustable gates (start, stop, width, & Threshold). Equipped with a 20dB boost/cut attenuator, which offers added flexibility for transducer types and applications. Selectable 50 volt pulser boost or cut (100 – 200 volts). Truly the Cadillac of the CMX series.

Additional DescriptionMore Details
PHYSICAL

  • Size: Width (2.5 in/63.5 mm)
    Height: (6.5 in/165 mm)
    Depth: (1.24 in/31.5 mm)
    Weight:13.5 ounces (with batteries).
  • Keyboard:Membrane switch pad with twelve tactile keys.
  • Operating Temperature:14 to 140F (-10C to 60C)
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
  • Display (Two Options): 1/8 VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in (62 x 45.7 mm). EL backlit (on/off/auto). 25 Hz screen refresh rate.
    1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 120 Hz screen refresh rate.

 

ULTRASONIC SPECIFICATIONS

  • Measurement Modes:
    Coating Off: Pulse-Echo (P-E)
    Coating On: Pulse-Echo Coating (PECT)
    Temp Comp: Pulse-Echo Temperature Compensation (PETP)
    Thru-Paint: Echo-Echo (E-E)
    Thru-Paint Verify: Echo-Echo Verify (E-EV)
    Coating Only: Coating (CT)
  • Pulser: Dual square wave pulsers.
  • Receiver: Dual receivers – manual or AGC gain control with 100 dB range. Adjustable damping with color option.
  • Timing: Precision 25 MHz TCXO with single shot 100 MHz 8 bit ultra low power digitizer.

 

POWER SOURCE

  • Three 1.5V alkaline or 1.2V NiCad AA cells.
  • Alkaline: grayscale up to 50 hours, and color up to 25 hours.
  • Nicad: grayscale up to 25 hours, and color up to 12 hours (charger not included).
  • Auto power off if idle 5 min.
  • Adjustable Dim feature for color display only. Power saving.
  • Battery status icon.
MEASURING

  • Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
  • Pulse-Echo Coating Mode (PECT) – (Material, Coating, Pit & Flaw Detection): Material: 0.025 to 19.999 inches (0.63 to 508 millimeters). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
  • Pulse-Echo Temp Comp Mode (PETP) – (Pit & Flaw Detection) Auto temperature compensation -measures from 0.025 to 19.999 inches (0.63 to 508 millimeters).
  • Echo-Echo Mode (E-E) – (Thru Paint & Coatings) measures from 0.050 to 4.0 inches (1.27 to 102 millimeters). Will vary based on coating.
  • Echo-Echo Verify (E-EV) – (Thru Paint & Coatings) measures from 0.050 to 1.0 inches (1.27 to 25.4 millimeters). Will vary based on coating.
  • Coating Only Mode (CT) – (Coating Thickness) Measures from 0.0005 to 0.100 inches (0.0127 to 2.54 millimeters). Range will vary +/- depending on the coating.
  • Resolution: +/- 0.001 inches (0.01 mm)
  • Velocity Range: 0.0492 to 0.5510 in/micro sec
    1250 to 13995 meters/sec
  • Single and Two point calibration option for material & coating, or selection of basic material types.
  • Units: English & Metric

 

DISPLAY

  • Large Digits – Standard thickness view. Digit Height: 0.700 in (17.78 mm). Color 0.565 in (14.35 mm).
  • A-Scan – Rectified +/- (flaw view)
  • RF (full waveform view).
  • B-Scan – Time based cross section view. Adjustable display speed.
  • Scan Bar Thickness – 6 readings per second. Viewable in B-Scan and Large Digit views.
  • Repeatability Bar Graph – Bar graph indicates stability of reading.
  • Feature Status Bar – Indicates features currently active.
DATA STORAGE

  • Log Formats: Grid (alpha numeric)
    Sequential (auto identifier)
  • Cell contents:
    Graphics On: Grayscale 16,000 & Color 8,000 readings ,A/B-Scan image, & gauge settings for every reading.
    Graphics Off: 210,000 readings (coating, material, min & max)
  • OBSTRUCT to indicate inaccessible locations.

 

TRANSDUCER

  • Transducer Types: Dual Element (1 to 10 MHz).
    Flaw Prove Up (1 to 10 MHz).
  • LEMO “00” connectors.
  • Standard 4 foot cable.
  • Custom transducers & cable lengths available for special applications.

 

ADDITIONAL FEATURES

  • Auto probe zero, recognition and temperature compensation.
  • 64 custom setup configurations.
  • High speed scan up to 50 readings per second.
  • Audible alarm with hi/lo limits.
  • Built-in differential mode for QC inspections.

 

WARRANTY & CERTIFICATION

  • 2 year limited
  • Factory calibration traceable to NIST & MIL-STD-45662
  • CE approved

$0.00Price:
Loading Updating cart...

MVX

The MVX finishes the line of MX gauges with class. This thing is loaded with all of the features of the MX gauges and a lot more. Four selectable display options: RF, Rectified, B-Scan, and Large Digits. An internal data logger that stores a total of 12,000 readings and waveforms, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find – just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability and portability! The MVXview java-based PC software makes this thing a complete kit, and then some!

Additional DescriptionMore Details
PHYSICAL

  • Weight: 13.5 ounces (with batteries).
  • Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
  • Operating Temperature: -14° to 140°F (-10° to 60°C).
  • Keyboard: Membrane switch with twelve tactile keys.
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
  • Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
  • EL backlit (on/off/auto).

 

ULTRASONIC SPECIFICATIONS

  • Measurement Modes: Pulse-Echo (flaws, pits)
  • Echo-Echo (thru-paint)
  • Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
  • Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
  • Timing: 20 MHz with ultra low power
  • 8 bit digitizer.

 

POWER SOURCE

  • Three 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
  • Auto power off if idle 5 min.
  • Battery status icon.
MEASURING

  • Range: Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).
  • Echo-Echo Mode: Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102 millimeters).
  • Range will vary +/- depending on the thickness of coating.
  • Resolution: +/- .001 inches (0.01 mm)
  • Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
  • Single and Two point calibration option, or selection of basic material types.
  • Units: English & Metric

 

DISPLAY

  • Display Views: A-Scan Rectified +/- (flaw view) RF (full waveform view)
  • B-Scan Cross sectional view.
  • Display speed of 15 secs per screen.
  • Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
  • Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
  • Repeatability Bar Graph Bar graph indicates stability of reading.

 

DATA LOGGER (INTERNAL)

  • 12,000 pages of memory (alpha numeric storage).
  • Page contents: 1 reading and 1 waveform per page.
  • OBSTRUCT to indicate inaccessible locations.
  • Memory: 16 megabit non-volatile ram.
TRANSDUCER

  • Transducer Types: Dual Element (1 to 10 MHz).
  • Locking quick disconnect “00” LEMO connectors.
  • Standard 4 foot cable.
  • Custom transducers and cable lengths available for special applications.

 

FEATURES

  • Setups: 64 custom user-definable setups.
  • Factory setups can also be edited by the user.
  • Gates: Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.
  • Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
  • Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
  • Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
  • Flaw Mode: Basic Prove-up flaw detection option using single element angle beam transducers.

 

CERTIFICATION

  • Factory calibration: traceable to national standards.

 

WARRANTY

  • 2 year limited

$0.00Price:
Loading Updating cart...

MVX

The MVX finishes the line of MX gauges with class. This thing is loaded with all of the features of the MX gauges and a lot more. Four selectable display options: RF, Rectified, B-Scan, and Large Digits. An internal data logger that stores a total of 12,000 readings and waveforms, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find – just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability and portability! The MVXview java-based PC software makes this thing a complete kit, and then some!

Additional DescriptionMore Details
PHYSICAL

  • Weight: 13.5 ounces (with batteries).
  • Size: 2.5 W x 6.5 H x 1.24 D inches (63.5 W x 165 H x 31.5 D mm).
  • Operating Temperature: -14° to 140°F (-10° to 60°C).
  • Keyboard: Membrane switch with twelve tactile keys.
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Data Output: Bi-directional RS232 serial port. Windows® PC interface software.
  • Display: 1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
  • EL backlit (on/off/auto).

 

ULTRASONIC SPECIFICATIONS

  • Measurement Modes: Pulse-Echo (flaws, pits)
  • Echo-Echo (thru-paint)
  • Pulser: Square wave pulser with adjustable pulse width (spike, thin, wide).
  • Receiver: Manual or AGC gain control with 40dB range, depending on mode selected.
  • Timing: 20 MHz with ultra low power
  • 8 bit digitizer.

 

POWER SOURCE

  • Three 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
  • Auto power off if idle 5 min.
  • Battery status icon.
MEASURING

  • Range: Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).
  • Echo-Echo Mode: Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102 millimeters).
  • Range will vary +/- depending on the thickness of coating.
  • Resolution: +/- .001 inches (0.01 mm)
  • Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
  • Single and Two point calibration option, or selection of basic material types.
  • Units: English & Metric

 

DISPLAY

  • Display Views: A-Scan Rectified +/- (flaw view) RF (full waveform view)
  • B-Scan Cross sectional view.
  • Display speed of 15 secs per screen.
  • Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).
  • Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
  • Repeatability Bar Graph Bar graph indicates stability of reading.

 

DATA LOGGER (INTERNAL)

  • 12,000 pages of memory (alpha numeric storage).
  • Page contents: 1 reading and 1 waveform per page.
  • OBSTRUCT to indicate inaccessible locations.
  • Memory: 16 megabit non-volatile ram.
TRANSDUCER

  • Transducer Types: Dual Element (1 to 10 MHz).
  • Locking quick disconnect “00” LEMO connectors.
  • Standard 4 foot cable.
  • Custom transducers and cable lengths available for special applications.

 

FEATURES

  • Setups: 64 custom user-definable setups.
  • Factory setups can also be edited by the user.
  • Gates: Single gate in pulse-echo mode, or single gate with holdoff in echo-echo mode. Adjustable threshold.
  • Selectable Transducers: Selectable transducer types with built-in dual path error correction for improved linearity.
  • Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.
  • Fast-Scan Mode: Takes 32 readings per second and displays the minimum reading found when the transducer is removed.
  • Flaw Mode: Basic Prove-up flaw detection option using single element angle beam transducers.

 

CERTIFICATION

  • Factory calibration: traceable to national standards.

 

WARRANTY

  • 2 year limited

$0.00Price:
Loading Updating cart...

MMX-6DL

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.

Additional DescriptionMore Details
PHYSICAL

  • Weight: 10 ounces
  • Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x  31.8 D mm)
  • Operating Temperature: -20° to 120° F (-30° to 50° C)
  • Case: Extruded aluminum body / nickel plated aluminum end caps.
  • Resistant to impact and environmentally sealed.

 

KEYPAD:

  • Sealed membrane that is resistant to both water and petroleum products.
  • Nine tactile-feedback keys.

 

TRANSDUCER

  • Dual element (transmit and receive).
  • 1 to 10 MHz frequency range.
  • Special high damped transducers available for use with through paint or coating measurements).
  • Locking quick disconnect LEMO connectors.
  • 4 foot cable.
  • Optional cable lengths up to 100 feet.
  • Custom transducers available for special applications.
POWER SOURCE

  • Two 1.5V alkaline or 1.2V NiCad AA cells
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.
  • Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

 

DISPLAY

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Backlight is selectable: on / off / auto ( illuminates only when taking a measurement ).
  • Measurements displayed in inches, inches/microsecond.  millimeters, and meters/second.
  • Bar graph indicates stability of reading.

 

DATA LOGGER

  • Automatic numeric Data Logging system 1 to 1000 readings.

 

FEATURES

  • Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.
  • Alarm Mode:Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
  • Data Ouput:RS232 output sends thickness readings to a printer, computer or other external storage device.
MEASURING

  • Range:
  • Pulse Echo Mode (Pit & Flaw Detection): Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
  • Echo Echo Mode (Thru Paint & Coatings): Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
  • Switch to select English or metric units.
  • Resolution: 0.001 inches (0.01 millimeters)
  • Velocity Range: .0492 to .3937 in/m s 1250 to 10,000 meters/sec
  • Built in: Stainless steel reference disk for probe zeroing.
  • Four readings per second for single point measurements or 16 per second in scan mode — captures the minimum thickness.
  • Single and Two point calibration option included.

 

CERTIFICATION

  • Factory calibration traceable to national standards.

 

WARRANTY

  • 5 year limited

$0.00Price:
Loading Updating cart...

MMX-6DL

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.

Additional DescriptionMore Details
PHYSICAL

  • Weight: 10 ounces
  • Size: 2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x  31.8 D mm)
  • Operating Temperature: -20° to 120° F (-30° to 50° C)
  • Case: Extruded aluminum body / nickel plated aluminum end caps.
  • Resistant to impact and environmentally sealed.

 

KEYPAD:

  • Sealed membrane that is resistant to both water and petroleum products.
  • Nine tactile-feedback keys.

 

TRANSDUCER

  • Dual element (transmit and receive).
  • 1 to 10 MHz frequency range.
  • Special high damped transducers available for use with through paint or coating measurements).
  • Locking quick disconnect LEMO connectors.
  • 4 foot cable.
  • Optional cable lengths up to 100 feet.
  • Custom transducers available for special applications.
POWER SOURCE

  • Two 1.5V alkaline or 1.2V NiCad AA cells
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.
  • Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

 

DISPLAY

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Backlight is selectable: on / off / auto ( illuminates only when taking a measurement ).
  • Measurements displayed in inches, inches/microsecond.  millimeters, and meters/second.
  • Bar graph indicates stability of reading.

 

DATA LOGGER

  • Automatic numeric Data Logging system 1 to 1000 readings.

 

FEATURES

  • Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.
  • Alarm Mode:Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.
  • Data Ouput:RS232 output sends thickness readings to a printer, computer or other external storage device.
MEASURING

  • Range:
  • Pulse Echo Mode (Pit & Flaw Detection): Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters).
  • Echo Echo Mode (Thru Paint & Coatings): Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).
  • Switch to select English or metric units.
  • Resolution: 0.001 inches (0.01 millimeters)
  • Velocity Range: .0492 to .3937 in/m s 1250 to 10,000 meters/sec
  • Built in: Stainless steel reference disk for probe zeroing.
  • Four readings per second for single point measurements or 16 per second in scan mode — captures the minimum thickness.
  • Single and Two point calibration option included.

 

CERTIFICATION

  • Factory calibration traceable to national standards.

 

WARRANTY

  • 5 year limited

$0.00Price:
Loading Updating cart...

DAKOTA MX-3

With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

Additional DescriptionMore Details
PHYSICAL

  • Weight: 10 ounces
  • Size: 2.5 W x 4.75 H x 1.25 D inches.
    63.5 W x 120.7 H x 31.8 D mm
  • Operating Temperature: -20 to 120F (-20 to 50C)
  • Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

 

KEYPAD

  • Sealed membrane that is resistant to both water and petroleum products.
  • Six tactile-feedback keys.

 

TRANSDUCER

  • Dual element (transmit and receive)
  • 1 to 10 MHz frequency range.
  • Locking quick disconnect Lemo connectors
  • 4 foot cable
  • Custom transducers available for special applications
POWER SOURCE

  • Two 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.

 

DISPLAY

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
  • Bar graph indicates stability or reading.

 

CERTIFICATION

  • Factory calibration traceable to national standards.

 

WARRANTY

  • 5 year limited.
MEASURING

  • Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
  • Switch to select English or metric units.
  • Resolution: 0.001 inch (0.01 millimeter)
  • Velocity Range: .0492 to .3937 in/m s. 1250 to 10,000 meters/sec
  • Built-in: Stainless steel reference disk for probe zeroing.
  • Four readings per second for single point measurements or 16 per second in SCAN mode.
  • Single and Two point calibration option included.

$0.00Price:
Loading Updating cart...

DAKOTA MX-3

With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited warranty.

Additional DescriptionMore Details
PHYSICAL

  • Weight: 10 ounces
  • Size: 2.5 W x 4.75 H x 1.25 D inches.
    63.5 W x 120.7 H x 31.8 D mm
  • Operating Temperature: -20 to 120F (-20 to 50C)
  • Case: Extruded aluminum body / nickel plated aluminum end caps. Resistant to impact and environmentally sealed.

 

KEYPAD

  • Sealed membrane that is resistant to both water and petroleum products.
  • Six tactile-feedback keys.

 

TRANSDUCER

  • Dual element (transmit and receive)
  • 1 to 10 MHz frequency range.
  • Locking quick disconnect Lemo connectors
  • 4 foot cable
  • Custom transducers available for special applications
POWER SOURCE

  • Two 1.5V alkaline or 1.2V NiCad AA cells.
  • Typically operates for 200 hours on alkaline and 130 hours on NiCad.

 

DISPLAY

  • Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
  • Measurements displayed in inches, inches/microsecond, millimeters, and meters/second.
  • Bar graph indicates stability or reading.

 

CERTIFICATION

  • Factory calibration traceable to national standards.

 

WARRANTY

  • 5 year limited.
MEASURING

  • Range: Measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
  • Switch to select English or metric units.
  • Resolution: 0.001 inch (0.01 millimeter)
  • Velocity Range: .0492 to .3937 in/m s. 1250 to 10,000 meters/sec
  • Built-in: Stainless steel reference disk for probe zeroing.
  • Four readings per second for single point measurements or 16 per second in SCAN mode.
  • Single and Two point calibration option included.

$0.00Price:
Loading Updating cart...
Close
E-mail It